Digital mapping of coastal boulders – high-resolution data acquisition to infer past and recent transport dynamics     

Fabian Boesl  Max Engel  Rodrigo C. Eco  JaN B. Galang  Lia A. Gonzalo  Francesca Llanes  Eva Quix  Helmut Brückner 《Sedimentology》2020,67(3):1393-1410

Coastal boulder fields provide clues to long-term frequency-magnitude patterns of coastal flooding events and have the potential to play an important role in coastal hazard assessment. Mapping boulders in the field is time and labour-intensive, and work on intertidal reef platforms, as in the present study, is physically challenging. By addressing coastal scientists who are not specialists in remote sensing, this contribution reports on the possibilities and limitations of digital applications in boulder mapping in Eastern Samar, Philippines, where recent supertyphoons Haiyan and Hagupit induced high waves, coastal flooding and boulder transport. It is demonstrated how satellite imagery of sub-metre resolution (from Pléiades and WorldView-3 imagery) enables efficient analysis of transport vectors and distances of larger boulders, reflecting variation in latitudes of both typhoon tracks and approaching angles of typhoon-generated waves. During the investigated events, boulders with a-axes of up to 8 m were clearly identified to have been shifted for up to 32 m, mostly along the seaward margin of the boulder field. It is, however, hard to keep track of smaller boulders, and the length of a-axes and b-axes including their orientation is often impossible to map with sufficient accuracy. Orthophotographs and digital surface models created through the application of an unmanned aerial vehicle and the ‘Structure from Motion’ technique provide ultra-high-resolution data, and have the potential to not only improve the results of satellite image analysis, but also those from field mapping and may significantly reduce overall time in the field. Orthophotographs permit unequivocal mapping of a-axes and b-axes including their orientation, while precise values for c-axes can be derived from the respective digital surface models. Volume of boulders is best inferred from boulder-specific Structure from Motion-based three-dimensional models. Battery power, flight speed and altitude determine the limits of the area covered, while patches shielded by the boulders are difficult to resolve. For some tasks, field mapping remains mandatory and cannot be replaced by currently available remote sensing tools: for example, sampling for rock type, density and age dating, recording of lithological separation of boulders from the underlying geological unit and of geomorphic features on a millimetre to decimetre-scale, or documentation of fine-grained sediment transport in between the boulders in supratidal settings. In terms of future events, the digital products presented here will provide a valuable reference to track boulder transport on a centimetre to decimetre-scale and to better understand the hydrodynamics of extreme-wave events on a fringing reef coastline.  相似文献   

基于IceBridge数据的南极别林斯高晋海的海冰厚度研究     

张建  杨元德  杨全明  汪楚涯 《冰川冻土》2020,42(2):295-306

海冰变化与全球气候、 生态系统和人类活动密切相关， 海冰厚度是海冰变化研究的重要参数之一。全面立体高精度观测海冰厚度的最有效手段是航空遥感， 而冰桥计划（IceBridge）是当前南北极最大的航空遥感工程。基于2009 - 2014年冰桥计划的激光雷达高程数据和数字测图系统相机光学影像对南极别林斯高晋海的海冰厚度进行研究， 并结合降雪量等气象数据探讨该区域海冰厚度变化的原因。研究发现该海域的海冰厚度在2009 - 2014年间整体呈微弱增长趋势（0.07 m·a^-1）， 但是在95%置信水平下不具有显著性。2009 - 2011年呈现先增加后减少的大幅度变化， 其中2010年达到极大值2.42 m， 之后开始缓慢增加。海冰厚度的年际变化与降雪和近地表温度等气象要素相关， 二者相比较而言降雪为主要影响因素。  相似文献   

Experimental study on a sampling technique based on a freeze-sediments valve for deep-sea microorganism     

《Applied Ocean Research》2019

Deep-sea microorganism research has become a hot topic in life science, owing to its special value in high pressure and low temperature environment. If not kept the in-situ low temperature and high pressure, it will cause the microorganism to lose its activity and lead to a waste of resources. A freeze-sediments valve presents a promising solution to maintain the low temperature and high pressure in situ, improve the success rate of sampling and shorten the sampling time. A series of experiments were conducted to characterize the freeze-sediments valve, including the sampling time without leakage, adaptation to different sediments and the effect of the length, etc. Most important of all, temperature change of sediments is observed in all experiments. Experimental results indicated that the freeze-sediments valve was formed in 5 min without leakage and the freeze-sediments valve could be applied to different sediments without limitations on sediments type and mineral content. Considering the pressure retaining capacity and formation time of freeze-sediments valve, it was found that the freeze-sediments valve with a length of 60–80 mm has good pressure retaining capacity whose value was 41.3–48.4 Mpa and short formation time which was 5 min. Precooling the sampler could be used to shorten the sampling time in the actual environment application. This sampling technique can play a vital role in maintaining in-situ low temperature at −2 to −4 ° Celsius in all the experiments. According to the tests, the sampling technique based on the freeze-sediments valve had the potential to solve the problem of keeping in-situ temperature, low sampling success rate and long sampling time in the future.  相似文献   

北半球热带中太平洋与印度洋海表温度梯度对夏季西北太平洋热带气旋生成频数变化的影响     

方珂  余锦华 《热带海洋学报》2019,38(5):42-51

基于1951—2018年哈德里中心海温资料、美国气象环境预报中心和美国国家大气研究中心再分析资料和第四代欧洲中心汉堡模式, 针对1994年、2018年等西北太平洋热带气旋(TC)生成异常多的年份, 研究了引起TC增加的海表温度异常(SSTA)模态及其影响机制。结果表明, 北半球热带中太平洋增暖与印度洋变冷是夏季西北太平洋TC生成频数增加的主要原因, 北大西洋负三极型式SSTA促使TC生成的进一步增加。热带中太平洋增暖与印度洋冷却在菲律宾以东激发出西风异常和气旋性环流异常。北大西洋负三极型式SSTA在我国南海、菲律宾至东南沿岸激发出气旋性环流异常。前者在西北太平洋中部, 后者在南海产生有利于TC生成的局地环境。1994年和2018年夏季热带中太平洋出现暖SSTA、印度洋为冷SSTA、北大西洋呈现负三极型式SSTA, 西北太平洋TC生成频数极端增多。近30年来, 当出现热带中太平洋增暖和印度洋冷却时, 北大西洋表现出比1989年以前更强的负三极型式SSTA, 使西北太平洋TC生成频数和北半球热带印度洋-太平洋SSTA梯度的线性相关更显著。  相似文献   

基于散射计风场数据的台风强度诊断方法——以海洋二号卫星数据为例   总被引：2，自引：2，他引：0  

杨典  宋清涛  蒋兴伟  刘宇昕  刘圆 《海洋学报》2019,41(1):151-159

本文提出了一种基于散射计风场数据的台风定强方法。该方法定义了台风所在海区的一个圆形区域上的风速平均值来对台风进行定强，并使用海洋二号卫星散射计历史数据对该方法进行了验证。验证结果表明，该台风定强方法可以克服散射计反演台风风速过低的问题。与台风强度监测的历史记录比较的结果显示，在台风强度低于"强台风"这一强度等级时，该方法能够有效估算台风强度。  相似文献   

Local meteoric water lines describe extratropical precipitation     

Devin F. Smith  Elsa Saelens  Deborah L. Leslie  Anne E. Carey 《水文研究》2021,35(2):e14059

Stable water isotopes δ¹⁸O and δ²H are used to investigate precipitation trends and storm dynamics to advance knowledge of precipitation patterns in a warming world. Herein, δ¹⁸O and δ²H were used to determine the relationship between extratropical cyclonic precipitation and local meteoric water lines (LMWLs) in the eastern Ohio Valley and the eastern United States. Precipitation volume weighted and unweighted central Ohio LMWLs, created with samples collected during 2012–2018, showed that temperature had the greatest effect on precipitation isotopic composition. HYSPLIT back trajectory modelling showed that precipitation was primarily derived from a mid-continental moisture source. Remnants of major hurricanes were collected as extratropical precipitation during the 2012–2018 sampling period in central Ohio. Extratropical precipitation samples were not significantly different from the samples that created the central Ohio LMWL. Six additional LMWLs were derived from United States Geological Survey (USGS) Atmospheric Integrated Research Monitoring Network (AIRMoN) samples collected in Pennsylvania, Delaware, Tennessee, Vermont, New Hampshire, and Oxford, Ohio. Meteoric water lines describing published samples from Superstorm Sandy, plotted with these AIRMoN LMWLs, showed isotopic composition of Superstorm Sandy precipitation was commonly more depleted than the average isotopic composition at the mid-latitude locations. Meteoric water lines describing the Superstorm Sandy precipitation were not significantly different in slope from LMWLs generated within 300 km of the USGS AIRMoN site. This finding, which was observed across the eastern Ohio Valley and eastern United States, demonstrated a consistent precipitation δ²H–δ¹⁸O relationship for extratropical cyclonic and non-cyclonic events. This work also facilitates the analysis of storm development based on the relationship between extratropical event signature and the LMWL. Analysis of extratropical precipitation in relation to LMWLs along storm tracks allows for stronger development of precipitation models and understanding of which climatic and atmospheric factors determine the isotopic composition of precipitation.  相似文献   

波段选择协同表达高光谱异常探测算法     

朱德辉  杜博  张良培 《遥感学报》2020,24(4):427-438

高光谱遥感影像具有光谱分辨率极高的特点,承载了大量可区分不同类型地物的诊断性光谱信息以及区分亚类相似地物之间细微差别的光谱信息,在目标探测领域具有独特的优势。与此同时,高光谱遥感影像也带来了数据维数高、邻近波段之间存在大量冗余信息的问题,高维度的数据结构往往使得高光谱影像异常目标类和背景类之间的可分性降低。为了缓解上述问题,本文提出了一种基于波段选择的协同表达高光谱异常探测算法。首先,使用最优聚类框架对高光谱波段进行选择,获得一组波段子集来表示原有的全部波段,使得高光谱影像异常目标类与背景类之间的可分性增强。然后使用协同表达对影像上的像元进行重建,由于异常目标类和背景类之间的可分性增强,对异常目标像元进行协同表达时将会得到更大的残差,异常目标像元的输出值增大,可以更好地实现异常目标和背景类的分离。本文使用了3组高光谱影像数据进行异常目标探测实验,实验结果表明,该方法与其他现有高光谱异常目标探测算法对比,曲线下面积AUC(Area Under Curve)值更高,可以更好地实现异常目标与背景分离,能够更有效地对高光谱影像进行异常目标探测。  相似文献   

空地技术结合地形图测图方法研究     

方秋生  王宵雷  刘如飞  马新江 《测绘与空间地理信息》2020,(3):37-40

车载移动测量系统可以快速、高精度地对测区进行三维激光扫描,但是因地物遮挡、视角限制,使得点云数据存在缺失;无人机航测具有高效率、高灵活性和低成本等优势,但是稳定性差,受天气影像严重,易导致影像不清晰或精度低。无人机航测技术可以弥补车载移动测量技术的采集盲区,后者可以发挥高精度的优点,二者技术联合应用,将极大提高测绘精度及生产效率。本文以某小区为例,进行了相关方法实验,对建筑物顶部或植被茂密处等扫描盲区,采用无人机航测补测,通过高精度激光点云对航摄影像进行纠正匹配,综合利用激光点云与航摄影像进行大比例尺测图。  相似文献   

曲靖非相干散射雷达电离层F区日间电子温度变化特征初步分析   总被引：1，自引：0，他引：1       下载免费PDF全文

丁宗华  代连东  杨嵩  唐志美  吴健  许正文 《地球物理学报》2020,63(4):1282-1293

利用曲靖非相干散射雷达2017-2018年春夏季观测数据首次分析了电离层日间150~450km电子温度的地方时与高度变化特征及其与电子密度的相关性.发现hmF2及以上的电子温度在日出日落时具有两个峰值,在11∶00-16∶00LT之间变化较小,高度越高午后上升的时间越早;从150km开始迅速增加,在约220km达到最大值,然后开始降低,在约300~350km达到最小值,最后单调上升;200km以下电子温度与电子密度成正相关(主要由热传导控制),200~450km之间存在明显的反相关(光电离过程占主导),电子-离子温度差与电子密度对数之间存在近似线性关系,电子温度逐日变化与光电离因子的变化趋势相似,这种相关性在中午与午后更明显;以上结果与其他非相干散射雷达观测和电离层模型计算结果基本一致,但也存在一些差别,需要结合更多数据深入分析.  相似文献   

激光跟踪仪在核电站主管道安装中的应用     

郭建兵 《北京测绘》2020,(1):123-125

目前,核电站的主管道焊接越来越多的采用了自动焊技术,这有利于提高焊接质量效率,还可以压缩建设成本。然而,主管道自动焊对焊缝的限差较现有工艺要求更高,高精度的测量是实现主管道自动焊的必要条件之一。本文针对主管道自动焊管口组队高精度的技术要求,提出采用激光跟踪仪对主管道自动焊相关的设备进行更为精密的三维工业测量,通过理论技术评定测量精度,然后选择测量仪器和编制具体的测量方案,最终保证了主管道自动焊精确组对的实现。  相似文献